European Championship for Carpenters task model 2014.

This current European Championship for Carpenters task model is extremely complex. I wonder if the apprentice carpenters had the drawings before the competition? Or how many of them actually completed the task model? 

Here's a couple of drawings of the European Championship for Carpenters task model 2014. I'm still not done, but you can get an general idea of how much geometric roof framing knowledge each of the apprentice carpenters must know to complete the task model.

3D drawing of the European Championship for Carpenters task model. I'll use this drawing to verify the geometry I develop is correct.

Basic ground plan of the roof.


Technique to develop the eave line that is level in plan view.

3D drawing of the hip rafters and raking/sloping plate lines.

3D drawing with plumb lines to establish the location of the jack rafters and purlin rafters on the roof surface.

Drawing of the base that holds up the roof.

Front sloped legs of the base.


Drawing with the legs and plates of the base.


Trying to establish the rotation of the hip rafter rotated into the roof surface.

Developing the profile rafter slope angle on the sides of the task model.

Raccord drawing of the roof surface.



Raccord drawing of the roof surface with the rafters on the roof surface.

Trying to develop the correct location of the rafters on the roof surface.
Drawing showing the technique I used to establish the miter line on the roof surface using the hip rafter backing triangle and the depth of the profile rafter. 


Drawing with the hip rafter foot print developed from the hip rafter material block rotated to the hip rafter backing angle.

Drawing showing the development of the Devers De Pas line for the DP side of the hip rafter rotated into the roof surface. Sure am glad I studied the Treteaux angles.

Transferring the lines to the sides of the timbers on the rof surface.



Drawing showing the miter and claw lines on the roof surface. I got the miter and claw lines dimensions from my RafterTools app for iPhone or Android.

Tréteaux Angles 
tréteau à devers

Roof Eave Angle = 126.58678
SS = Main Rafter Slope Angle = 38.65981
S = Adjacent Rafter Slope Angle = 37.05220
__________________________________________________
DD = Main Plan Angle = 60.00000
D = Adjacent Plan Angle = 66.58678

R1 = Hip Rafter Slope Angle = 34.71501
C5m Main Hip Rafter Backing Angle = 18.20076
C5a Adjacent Hip Rafter Backing Angle = 13.85266
Valley Sleeper Saw Blade Bevel Angle = 90° - (C5m + C5a) = 57.94657

P2m = Main Jack Rafter Side Cut Angle = 24.26751
90° - P2m = Main Roof Sheathing Angle = 65.73249
P2a = Adjacent Jack Rafter Side Cut Angle = 19.06421
90° - P2a = Adjacent Roof Sheathing Angle = 70.93579
Purlin Depth = 70
Hip Rafter Depth = 60
Hip Rafter Width = 60

DP Side Claw Line Dimensions


Roof Sheathing Angle


70.93579°


Seat Line for Rafters in Ground Plan Dimension


116.17440


Seat Line for Rafters on Roof Surface Dimension


92.71727


Claw Line #1 Dimension


0.00000


Claw Line #2 Dimension


113.05613


Claw Line #3 Dimension


43.83167


Claw Line #4 Dimension


1.26481





Treteaux Angles
  
R8-DP
Tilted Hip Rafter Slope Angle on DP Side of Hip Rafter.

36.10362°

R9-DP
Horizontal Plane Rotation Angle for Tilted Hip Rafter on DP Line from Footprint to Hip Rafter Run Line.

10.60575°

D-DP
Horizontal Plane Rotation Angle for Tilted Hip Rafter on DP Line from Eave Line to Hip Rafter Footprint

55.98103°

R10-DP
Vertical Plane Rotation Angle from Plumb for Tilted Hip Rafter on DP Line

15.12401°

PSBm-DP
Prism Footprint Saw Blade Bevel Angle Along side of Hip Rafter Rotated into the Roof Surface Plane at Foot Of Hip Rafter

51.34019°

PSBa-DP
Prism Footprint Saw Blade Bevel Angle Along side of Hip Rafter on DP Side at Foot of Hip Rafter

14.87719°

SR4Bm-DP
Prism Footprint Angle in Plan View at Eave Line Intersection

70.60575°

SR4Ba-DP
Prism Footprint Angle in Plan View at Intersection of DP Line and Profile Rafter Footprint Line in Plan View

109.39425°

Drawings with claw line development using the draw down technique.








































Komentar











Posting Komentar



















Postingan populer dari blog ini









Layover Valley Rafter Basics




















Gambar







Before I get into the Hexenschnitt for the Layover Valley Rafter I needed to review the basic geometry that defines the layover valley rafter. I needed to make sure I could draw the layover valley rafter correctly in plan view (ground plan). Here's one method of a basic drawing using the layover valley rafter backing triangle to position the layover valley rafter material on the roof surface that defines the  layover valley rafter in plan view. The  layover valley rafter top bevel is easily defined by extending the  layover valley rafter backing triangle to the top of the  layover valley rafter. The other  layover valley rafter line in plan view is defined by the bottom edge of the  layover valley rafter material sitting on the  layover valley rafter backing triangle. (Roof Surface). The  layover valley rafter plan view lines at the intersection of the two roofs. I tried this method for drawing the  layover valley rafter, but this method seems to be slow of a process for determinin








Baca selengkapnya










Hip Rafter Edge Bevel and Backing Angle




















Gambar







In complex roof framing there are 7 main roof framing angles. Hip Rafter Backing Angle Valley Sleeper Bevel Angle Plain Titl (DP) Main Plan Angle Adjacent Plan Angle  Main Profile Rafter Slope Angle Adjacent Profile Rafter Slope Angle In this article I will discuss the hip rafter backing angle and the valley sleeper bevel angle. These two angles determine the miter angle and and saw blade bevel angles for jack rafters and purlin rafters that are plumb to the earth and for jack rafters and purlin rafters that are skewed from the eave line. A thorough knowledge of these two angles is critical in complex roof framing using geometry or trigonometry. The hip rafter edge bevel was avoided in the 12th century on some roof structures by rotating the hip rafter into the roof surface plane. However, by avoiding the hip rafter edge bevel, the carpenters-builders had to have a knowledge of the Valley Sleeper Bevel Angle. They didn't call it the Valley Sleeper Bevel Angle, but it's the same








Baca selengkapnya










Layover Valley Rafter Hexenschnitt #3




















Gambar







In the book Das neue Buch vom alten Wissen der Schiftung The new book on the ancient knowledge Schiftung The new book on the ancient knowledge Roof Framing The new book on the ancient knowledge Roof Framing Geometry by Bernd Küppers I'm stuck on page 23. The geometry in the book, just doesn't return the correct miter angle for the Layover Valley Rafter Witches Cut (Hexenschnitt). I don't know if I'm drawing it incorrectly, or the BE (Bottom Edge Plane of the Layover Valley Rafter) should be drawn differently. Similar drawing at File: Kehlbohle mit Hexenschnitt.jpg There's 3 canted planes that define the Layover Valley Rafter Witches Cut Miter Angle. The main roof surface, the square tail fascia plane of the main roof and the the square tail fascia plane of the adjacent roof.  I think the problem with my geometric drawings is defining the intersection of the roof surface with the adjacent  square tail fascia plane.








Baca selengkapnya