Saw Blade Bevel Angle

Formulas for the Saw Blade Bevel Angle, depending on what angles you know or what the direction of saw travel is.

Saw Blade Bevel Angle From Miter Line Side = arctan(cos(Miter Angle) ÷ tan(Bevel Angle on Stick)
Saw Blade Bevel Angle From Miter Line Side = arctan(cos(33.69007°) ÷ tan(39.76216°) = 45.00°

Saw Blade Bevel Angle From Miter Line Side = arctan(sin(Miter Angle on Stick) ÷ tan(Bevel Angle on Stick)
Saw Blade Bevel Angle From Miter Line Side = arctan(sin(56.30993°) ÷ tan(39.76216°) = 45.00°

Saw Blade Bevel Angle From Bevel Line Side =arctan(sin(Bevel Angle on Stick) ÷ tan(Miter Angle on Stick)
Saw Blade Bevel Angle From Miter Line Side = arctan(sin(39.76216°) ÷ tan(56.30993°) = 23.09347°

Saw Blade Bevel Angle From Bevel Line Side =arctan(cos(Bevel Angle) ÷ tan(Miter Angle on Stick)
Saw Blade Bevel Angle From Miter Line Side = arctan(cos(50.23784°) ÷ tan(56.30993°) = 23.09347°

Online Saw Blade Bevel Angle Calculator





Intersection of vertical plumb plane following the eave line and the vertical plumb plane of the hip rafter . The saw blade bevel angle is the intersection of these two planes for jack rafters head cuts and hip rafter head cuts.


Roof Eave Angle = 90.00000
SS = Main Rafter Slope Angle = 36.86990
S = Adjacent Rafter Slope Angle = 45.00000

DD = Main Plan Angle = 53.13010
D = Adjacent Plan Angle = 36.86990

Saw Blade Bevel Angle = arctan(sin(45.00°) ÷ tan(43.31386°) = 36.8699° = Plan Angle for Plumb Hip Rafters




Rake Crown Molding Saw Blade Bevel Angle Problem




I still need to calculate the saw blade bevel angles. I can calculate the dihedral angle, but not the saw blade bevel angles.

Face angle a = 52.07865
Face angle b = 86.60217
Face angle c = 90
Dihedral angle = arccos((cos(c) - cos(a) * cos(b))/ (sin(a)*sin(b)) = C = 92.65123°
Dihedral angle = arccos((cos(a) - cos(b) * cos(c))/ (sin(c)*sin(b))=A = 52°
Dihedral angle = arccos((cos(b) - cos(a) * cos(c))/ (sin(a)*sin(c))=B =85.69117°

Dihedral angle = arccos((cos(90) - cos(52.07865) * cos(86.60217))/ (sin(52.07865)*sin(86.60217))= 92.65123°

Eave side
Miter Angle on Stick  = 52.07865°
Saw Blade Bevel Angle = 37.01689

Rake side
Miter Angle on Stick =86.60217°
Saw Blade Bevel Angle = 50.33188



Now, it looks like the Saw Blade Bevel angles are

Eave side


Miter Angle on Stick  = 52.07865°

Saw Blade Bevel Angle =38.18968°

Rake side
Miter Angle on Stick =86.60217°
Saw Blade Bevel Angle = 49.15886°


Roof Eave Angle = 54.53879
SS = Main Rafter Slope Angle = 46.62978
S = Adjacent Rafter Slope Angle = 55.15376

DD = Main Plan Angle = 31.73219
D = Adjacent Plan Angle = 22.80660

R1 = Hip Rafter Slope Angle = 29.10711.... This the only variable we know.
C5m Main Hip Rafter Backing Angle = 38.18968
C5a Adjacent Hip Rafter Backing Angle = 49.15886
Valley Sleeper Saw Blade Bevel Angle = 90° - (C5m + C5a) = 2.65146
Dihedral = 92.65146

P2m = Main Jack Rafter Side Cut Angle = 47.99665
90° - P2m = Main Roof Sheathing Angle = 42.00335
P2a = Adjacent Jack Rafter Side Cut Angle = 53.64927
90° - P2a = Adjacent Roof Sheathing Angle = 36.35073




Joseph Fusco at Fine HomeBuilding on exterior Crown Miter Angles

The American House-carpenter

The American house-carpenter
a treatise upon architecture, cornices and mouldings, framing, doors, windows, and stairs. Together with the most important principles of practical geometry.
5th ed., with additions. Illustrated by more than three hundred engravings.
By R. G. Hatfield.

Published  


Komentar

Posting Komentar

Postingan populer dari blog ini

Layover Valley Rafter Basics

Gambar
Before I get into the Hexenschnitt for the Layover Valley Rafter I needed to review the basic geometry that defines the layover valley rafter. I needed to make sure I could draw the layover valley rafter correctly in plan view (ground plan). Here's one method of a basic drawing using the layover valley rafter backing triangle to position the layover valley rafter material on the roof surface that defines the  layover valley rafter in plan view. The  layover valley rafter top bevel is easily defined by extending the  layover valley rafter backing triangle to the top of the  layover valley rafter. The other  layover valley rafter line in plan view is defined by the bottom edge of the  layover valley rafter material sitting on the  layover valley rafter backing triangle. (Roof Surface). The  layover valley rafter plan view lines at the intersection of the two roofs. I tried this method for drawing the  layover valley rafter, but this method...
Baca selengkapnya

Hip Rafter Edge Bevel and Backing Angle

Gambar
In complex roof framing there are 7 main roof framing angles. Hip Rafter Backing Angle Valley Sleeper Bevel Angle Plain Titl (DP) Main Plan Angle Adjacent Plan Angle  Main Profile Rafter Slope Angle Adjacent Profile Rafter Slope Angle In this article I will discuss the hip rafter backing angle and the valley sleeper bevel angle. These two angles determine the miter angle and and saw blade bevel angles for jack rafters and purlin rafters that are plumb to the earth and for jack rafters and purlin rafters that are skewed from the eave line. A thorough knowledge of these two angles is critical in complex roof framing using geometry or trigonometry. The hip rafter edge bevel was avoided in the 12th century on some roof structures by rotating the hip rafter into the roof surface plane. However, by avoiding the hip rafter edge bevel, the carpenters-builders had to have a knowledge of the Valley Sleeper Bevel Angle. They didn't call it the Valley Sleeper Bevel Angle, but it's the same...
Baca selengkapnya

Layover Valley Rafter Hexenschnitt #3

Gambar
In the book Das neue Buch vom alten Wissen der Schiftung The new book on the ancient knowledge Schiftung The new book on the ancient knowledge Roof Framing The new book on the ancient knowledge Roof Framing Geometry by Bernd Küppers I'm stuck on page 23. The geometry in the book, just doesn't return the correct miter angle for the Layover Valley Rafter Witches Cut (Hexenschnitt). I don't know if I'm drawing it incorrectly, or the BE (Bottom Edge Plane of the Layover Valley Rafter) should be drawn differently. Similar drawing at File: Kehlbohle mit Hexenschnitt.jpg There's 3 canted planes that define the Layover Valley Rafter Witches Cut Miter Angle. The main roof surface, the square tail fascia plane of the main roof and the the square tail fascia plane of the adjacent roof.  I think the problem with my geometric drawings is defining the intersection of the roof surface with the adjacent  square tail fascia plane.
Baca selengkapnya