Fledermausgaube mit gerader Kehle

In the book
Das neue Buch vom alten Wissen der Schiftung
The new book on the ancient knowledge Schiftung
The new book on the ancient knowledge Roof Framing
The new book on the ancient knowledge Roof Framing Geometry
by Bernd Küppers



on page 94 , he describes the geometric technique to draw out an eyebrow dormer that rest on two canted valley rafters. I'm posting this drawing hoping that Bernd will comment on the questions I have on this drawing technique.


Bernd's answer

hello Sim
the angle between the hip line and the auxiliary line in the arc, is not necessarily 90 °. The important thing is, that the pitch break holds at least 3 tiles.
the legs of the upper triangle are hip lines and form the transition between curved and straight roof surface.
the third is the valley line in the front view
and the fourth is indeed the inner top edge of the inner valley rafter.

Bernd's suggestion
If you want, you can add the pages of the eyebrow dormer to your blog. This should explain the drawing method of the straight valley line.
I'm helping Bernd translate his book to readable English. Billy or Brad take a look at Bernd's current English translation and see if it make sense.  I think the biggest difference between his method and what I know on eyebrow dormer roof design, is the concept of designing the eyebrow dormer for tiles, instead of composition shingles.







Here's an image of the eyebrow dormer with the straight throat that Bernd Kuppers shared.


Here's a drawing by Bernd Brueck showing the hip and valley rafter of the eyebrow dormer and ribs with a straight throat.
Here's a link to the 3-D PDF file
Bernd Brueck Fledermausgaube








Komentar

Posting Komentar

Postingan populer dari blog ini

Layover Valley Rafter Basics

Gambar
Before I get into the Hexenschnitt for the Layover Valley Rafter I needed to review the basic geometry that defines the layover valley rafter. I needed to make sure I could draw the layover valley rafter correctly in plan view (ground plan). Here's one method of a basic drawing using the layover valley rafter backing triangle to position the layover valley rafter material on the roof surface that defines the  layover valley rafter in plan view. The  layover valley rafter top bevel is easily defined by extending the  layover valley rafter backing triangle to the top of the  layover valley rafter. The other  layover valley rafter line in plan view is defined by the bottom edge of the  layover valley rafter material sitting on the  layover valley rafter backing triangle. (Roof Surface). The  layover valley rafter plan view lines at the intersection of the two roofs. I tried this method for drawing the  layover valley rafter, but this method seems to be slow of a process for determinin
Baca selengkapnya

Hip Rafter Edge Bevel and Backing Angle

Gambar
In complex roof framing there are 7 main roof framing angles. Hip Rafter Backing Angle Valley Sleeper Bevel Angle Plain Titl (DP) Main Plan Angle Adjacent Plan Angle  Main Profile Rafter Slope Angle Adjacent Profile Rafter Slope Angle In this article I will discuss the hip rafter backing angle and the valley sleeper bevel angle. These two angles determine the miter angle and and saw blade bevel angles for jack rafters and purlin rafters that are plumb to the earth and for jack rafters and purlin rafters that are skewed from the eave line. A thorough knowledge of these two angles is critical in complex roof framing using geometry or trigonometry. The hip rafter edge bevel was avoided in the 12th century on some roof structures by rotating the hip rafter into the roof surface plane. However, by avoiding the hip rafter edge bevel, the carpenters-builders had to have a knowledge of the Valley Sleeper Bevel Angle. They didn't call it the Valley Sleeper Bevel Angle, but it's the same
Baca selengkapnya

Layover Valley Rafter Hexenschnitt #3

Gambar
In the book Das neue Buch vom alten Wissen der Schiftung The new book on the ancient knowledge Schiftung The new book on the ancient knowledge Roof Framing The new book on the ancient knowledge Roof Framing Geometry by Bernd Küppers I'm stuck on page 23. The geometry in the book, just doesn't return the correct miter angle for the Layover Valley Rafter Witches Cut (Hexenschnitt). I don't know if I'm drawing it incorrectly, or the BE (Bottom Edge Plane of the Layover Valley Rafter) should be drawn differently. Similar drawing at File: Kehlbohle mit Hexenschnitt.jpg There's 3 canted planes that define the Layover Valley Rafter Witches Cut Miter Angle. The main roof surface, the square tail fascia plane of the main roof and the the square tail fascia plane of the adjacent roof.  I think the problem with my geometric drawings is defining the intersection of the roof surface with the adjacent  square tail fascia plane.
Baca selengkapnya